Which SIP monitoring tool actually checks what breaks.
Plenty of tools say they monitor VoIP. Fewer send real SIP, and fewer still read the answer the way an engineer would. This is what each one checks according to its own documentation, as of 15 November 2026. Where another tool is the better fit, we say so.
Each row links to the page the claim comes from. If something here is out of date, tell us at hello@sipsentry.net and we will correct it.
toolwhat it checks · best fitpricing
PRTG
self-hosted or hosted
SIP Options Ping sensor: sends OPTIONS with optional credentials and reports the response code and time. QoS sensors measure jitter, loss and MOS between PRTG probes, not to your SBC.
fits: You already run PRTG and want trunk reachability next to everything else. source
by sensor count; 100-sensor freeware tier
Uptime Kuma
self-hosted, MIT
SIP OPTIONS monitor since 2.1.0, through sipsak. Up only on a 200 OK reply. As of 2.5 it needs a non-Docker install with sipsak added by hand; the next major release is set to bundle it.
fits: A homelab or a single PBX where a 200-or-not OPTIONS check is enough. source
free
Nagios / Icinga
self-hosted
Community plugins send OPTIONS over UDP, TCP or TLS (nagios-sip-plugin) or place an authenticated INVITE (check_sip_call). The ones we found are archived or unmaintained.
fits: An existing Nagios estate and someone willing to own an unmaintained plugin. source
free
Zabbix
self-hosted, AGPL
No SIP check built in. The Asterisk template reads the Asterisk manager interface rather than sending SIP. OPTIONS means an external script, usually sipsak.
fits: Asterisk internals (channels, peers) inside an existing Zabbix. source
free
Telegraf SIP input
self-hosted
OPTIONS, INVITE or MESSAGE with digest auth over UDP, TCP, WS or WSS, as metrics into your own time-series stack.
fits: Teams that already run an InfluxDB or Prometheus pipeline and build their own alerting. source
free
VoIPmonitor
on-prem sniffer, cloud GUI
Passive: captures the traffic you already carry and gives call records, quality scores and PCAPs. It does not send test traffic of its own.
fits: Quality analysis of real customer calls. A different job, and a good companion to active checks. source
per concurrent call
NodePing
hosted
SIP check sends OPTIONS over UDP, then TCP, and also TLS and WebSocket. An error reply still counts as up.
fits: A general uptime service that also covers basic SIP reachability. source
from $10/month
Dotcom-Monitor
hosted, private agent
REGISTER with credentials and INVITE test calls. No RTP and no MOS.
fits: Registration and call-setup checks inside a broader synthetic-monitoring suite. source
from $40/month for 5 targets
ThousandEyes
hosted, enterprise
SIP Server test over TCP, UDP or TLS with optional REGISTER; RTP Stream test measures MOS between ThousandEyes agents.
fits: Enterprises already buying ThousandEyes for network path visibility. source
quote
Cyara (Spearline)
hosted, enterprise
In-country test calls to real phone numbers in 145+ countries, scored with PESQ/POLQA.
fits: Contact centres testing that their numbers ring from abroad. The right tool for that job; heavier than trunk monitoring needs. source
quote
UptimeRobot, Better Stack, Checkly, Site24x7
hosted
No SIP check. UptimeRobot and Better Stack can send a fixed UDP payload; Checkly has an open request for SIP; Site24x7 VoIP monitoring uses Cisco IP SLA.
fits: The rest of your estate. Not your trunks. source
n/a
Where SIP/SENTRY fits
Hosted, active, and built for people who run other people's voice. It is not a passive call analyser and it does not dial phone numbers in 145 countries.
▸OPTIONS over UDP, TCP and TLS, where 403 and 405 count as alive
▸REGISTER with MD5 and SHA-256 digest, removing its own binding
▸TLS certificate expiry with the SIP domain as SNI, and the NAPTR/SRV chain
▸Test calls to an echo extension, scored with the G.107 E-model
▸Failures re-checked from other probes before anyone is paged
▸Per-customer groups, status pages and alert routing for MSPs
It depends on what you need to know. To watch trunks, registrars and SBCs from the internet and be alerted only when calls would fail, you need active SIP checks (OPTIONS, REGISTER with digest auth, TLS on the SIP port, DNS SRV) plus alerting that does not page on a firewall drop. To analyse the quality of real customer calls you need a passive tool such as VoIPmonitor. To test that numbers ring from other countries you need an in-country call testing service such as Cyara. Many operators run one of each kind.
Can I monitor SIP trunks for free?
Yes. Uptime Kuma (since 2.1.0) and Telegraf can send SIP OPTIONS and are free to self-host, and the PRTG freeware tier includes its SIP Options Ping sensor. SIP/SENTRY is free for three monitors at a five-minute interval, hosted, with REGISTER, TLS and DNS checks included. Self-hosted options share fate with the network they watch, so an outage that takes out your network can also take out the monitor.
What is the difference between active and passive SIP monitoring?
Active monitoring sends its own SIP traffic (an OPTIONS ping, a REGISTER, a test call) and judges the response, so it works at 3 AM when nobody is calling and tells you about a failure before a customer finds it. Passive monitoring captures the calls you already carry and analyses them, so it sees the quality customers actually experience, but only for calls that happen. Active checks find outages; passive analysis explains quality complaints.
Why is an OPTIONS check that requires 200 OK not enough?
Because healthy SBCs often answer OPTIONS with 403 Forbidden or 405 Method Not Allowed, and many drop OPTIONS from unknown sources without answering at all. A monitor that only accepts 200 OK either cannot be pointed at those SBCs or pages someone for a policy that is working as designed. And OPTIONS proves only that something processes SIP: a trunk can answer OPTIONS while its registration has lapsed or its TLS certificate has expired.
Point one check at it and find out
Three monitors free, forever. No card, no sales call, first result inside a minute.